NGX 96" Quick-Connect Clamp Edge Instructions

The video below shows how to attach the Quick-Connect extension to the NGX Clamp Edge.

Note: The product in the video may not reflect the exact model you have due to continuous improvement.

Written instructions are below:

1. Remove the sliding clamp from the main track.
2. Turn the sliding clamp 180 degrees.
3. Put the sliding clamp back onto the main track.
4. Flip the extension over.
5. Fold out the orange locking lever on the quick-connect mechanism. 
6. Remove any screws from the metal connectors on the side that extends from the extension if needed.
7. Slide the extension into the open end of the clamp edge and insert the quick connect fully, so the aluminum guide rails are pressed against each other.
8. Depress the locking lever to lock the Clamp Edge and extension together.