How to put BORA Centipede into its carry bag quickly & easily

The video below shows how to put a CK6S with 4 double p-tops into its carry bag. This can be difficult due to the increased size of the tops compared to the standard P-top. The video shows a quick and easy way to solve this. There are written instructions below the video.

How To

1. Close the Centipede stand so the tops and feet are touching.
2. Rotate the tops so they 'nest'. The rounded part opposite the accessory attachment holes should sit in the curved section between the accessory attachment holes of the double P-top next to it. This will allow the P-tops to take up less space overall. 
3. Hold the carry bag by one end and slide it over the top of the Centipede stand. Zipping the bag partially shut along the end can help it sit on the stand easier.
4. Once the end of the bag is set at the top of the Centipede, zip the zipper about halfway down the stand so half the bag is on the stand and the other half is hanging loose.
5. Flip the stand over.
6. Hold the bag near the end of the open section of zipper with one hand. With the other hand, hold the bag at the corner, where the zipper turns from the short side to the longer part of the bag.
7. Guide the stand into the bag by pulling the bag across the stand. The aim is to pull the stand into the corner of the bag, then sliding the outside of the bag across the far side. 
8. Once the bag is on the stand, finish zipping the bag shut.