BORA Speedhorse and XT Setup & Tear-down

The videos below show how to set up the Speedhorse & Speedhorse XT and fold the legs back up when you are done using them.

Speedhorse Walkthrough

Instructions:

1. Ensure enough space is below the sawhorse to allow the legs to stand up fully. For most people, holding it at waist height is usually enough height.
2. To set up, pull the leg release latch in the center of the Speedhorse. The legs will release and lock in place on their own
3. To fold, pull the leg latch to release the leg.
4. Push the leg into the body. You may need to push up on the bottom of the leg braces to release the legs. The legs will fold together as they are pushed into the body of the sawhorse.
5. DO NOT force the legs shut.
6. Push the legs fulling into the body of the sawhorse until you hear a 'click' of the legs latching in place.

Speedhorse XT Walkthrough

Instructions:

1. Make sure enough space is below the sawhorse to allow the legs to stand up fully. For most people, holding it at waist height is usually enough height.
2. To set up, pull the leg release latch in the center of the Speedhorse. The legs will release and lock in place on their own
3. Pull down on the adjustable leg to raise the legs to your desired height
4. To fold, lower all legs to the minimum height.
5. Pull the leg latch to release the leg.
6. Push the leg into the body. You may need to push up on the bottom of the leg braces to release the legs. The legs will fold together as they are pushed into the body of the sawhorse.
7. DO NOT force the legs shut.
8. Push the legs fulling into the body of the sawhorse until you hear two clicks on the first leg and one click on the second leg that is folded. This is so that the legs properly latch in the sawhorse's body.
9. The second leg may need some slight pressure for the leg to latch in place.