Help CenterBelow is a fit guide for checking if a circular saw will fit the Rip Guide. There is also a list of saws that have been confirmed to work with the rip guide.
General Notes
- The rip guide saw plate is 1/4" thick, so the max depth of cut is 1/4" less than the max depth of cut on the circular saw
Fit guide
PDF Available Here
Compatible Saws
Please note: This is not a comprehensive list, but is updated as more saws are confirmed to fit.
- Milwaukee M18™ Brushless 7-1/4" Circular Saw (2631-20)
- NOTE: Use CP batteries to achieve maximum depth of cut
- Milwaukee M18 FUEL™ 7-1/4" Circular Saw (2732-20)
- NOTE: Use CP batteries to achieve maximum depth of cut
- SKILSAW 5580 7-1/4" Circular Saw (5580)
- NOTE: The blade wrench needs removed to fit
- Makita 5007F 7-1/4" Circular Saw (5007F)
- Metabo HPT C3607DAQ4 36V MultiVolt™ 7-1/4 Inch Cordless Circular Saw (C3607DAQ4)
- NOTE: Battery will bump against the sliding clamp, so will not be able to acheive max depth of cut compared to no saw plate/guide
- DEWALT DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw (DC390B)
- DEWALT DCS566 6-1/2" Cordless Circular Saw (DCS566)
- BOSCH CS5 7-1/4" CIRCULAR SAW (0601672075)
- PORTER-CABLE 13-Amp 7-1/4-in Corded Circular Saw (PC13CSL)
- NOTE: The blade wrench needs removed to fit