BORA NGX Saw Plate RT compatibility

Below is the fit guide to check if your specific saw is compatible with the 546001 BORA NGX Saw Plate RT. There is also a list of saws below that have been confirmed to fit the saw plate.

General Notes

• The NGX Saw Plate RT is 1/4" thick, so the max depth of cut is 1/4" less than the max depth of cut on the circular saw

Fit Guide:

Compatible Saws

Please note: This is not a comprehensive list, but is updated as more saws are confirmed to fit.

• Milwaukee M18™ Brushless 7-1/4" Circular Saw (2631-20)
• NOTE: Use CP batteries to achieve maximum depth of cut
• Milwaukee M18 FUEL™ 7-1/4" Circular Saw (2732-20)
• NOTE: Use CP batteries to achieve maximum depth of cut
• SKILSAW 5580 7-1/4" Circular Saw (5580)
• NOTE: The blade wrench needs removed to fit
• Makita 5007F 7-1/4" Circular Saw (5007F)
• Metabo HPT C3607DAQ4 36V MultiVolt™ 7-1/4 Inch Cordless Circular Saw (C3607DAQ4)
• NOTE: Battery will bump against the sliding clamp, so will not be able to acheive max depth of cut compared to no saw plate/guide
• DEWALT DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw (DC390B)
• DEWALT DCS566 6-1/2" Cordless Circular Saw (DCS566) 
• BOSCH CS5 7-1/4" CIRCULAR SAW (0601672075)
• PORTER-CABLE  13-Amp 7-1/4-in Corded Circular Saw (PC13CSL)
• NOTE: The blade wrench needs removed to fit